{"product_id":"hooga-ember-red-light-therapy-panel-for-sauna","title":"Hooga Ember Red Light Therapy Panel for Sauna","description":"\u003cp\u003e\u003cspan\u003eThe Ember Red Light Therapy Panel for Sauna is purpose-built to run inside a hot, humid sauna. With a sealed IP65-rated housing, an aluminum body, a 4-in-1 lens over every LED, and a 194°F max operating temperature, it’s engineered to survive the conditions that ruin a standard red light panel — and bring full-spectrum red and near-infrared therapy directly into your sauna sessions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e384 medical-grade LEDs, four clinically relevant wavelengths, and 175 mW\/cm² peak irradiance in a compact 20.1″ × 12″ × 2.2″ footprint (15.4 lbs) designed for personal saunas, corner installs, and dedicated wellness rooms.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy a Sauna-Safe Panel Is Different\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eStandard red light therapy panels are not built for sauna environments. Heat, steam, and humidity destroy non-sealed electronics, melt plastic housings, and corrode connections. Most home panels are rated for ambient room temperatures only — running them in a sauna voids the warranty and risks failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Hooga Ember is engineered for sauna use from the ground up:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 sealed housing\u003c\/strong\u003e — dust-tight and protected against water jets, the industry-standard rating for wet-environment electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum housing\u003c\/strong\u003e — no plastic to warp or off-gas in heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65-rated internal driver\u003c\/strong\u003e — sealed power supply inside the panel, not a separate brick that can’t take the heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e194°F (90°C) maximum operating temperature\u003c\/strong\u003e — covers the full range of traditional and infrared saunas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal cooling fan\u003c\/strong\u003e with \u003cstrong\u003eautomatic thermal shutdown above 90°C\u003c\/strong\u003e and auto-restart below 60°C — all settings stored in memory\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFCC, CE, and RoHS certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003eIndependent Wavelength Control\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eUnlike single-button panels, the Ember gives you separate controls for each of the four wavelengths. Run red only (630\/660 nm) for skin-focused sessions, near-infrared only (810\/850 nm) for deeper-tissue exposure, or all four together for full-spectrum coverage. Combine with the brightness, timer, and pulse settings to tailor every session.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhere It Fits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonal infrared and traditional saunas\u003c\/strong\u003e — hang it, wall-mount it, or set it on the floor stand inside the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWellness rooms and recovery suites\u003c\/strong\u003e — pairs with sauna sessions for combined heat + light protocols\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmaller spaces\u003c\/strong\u003e where the larger Blaze won’t fit but you still want full-spectrum therapy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary panel\u003c\/strong\u003e pairing with an existing Blaze for wider coverage in larger cabins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eThree Ways to Mount It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEvery panel ships with everything you need to hang or wall-mount it. The floor stand is the only mounting option sold separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHang it\u003c\/strong\u003e — the included hanging cable and pulley suspend the panel from the sauna ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall-mount it\u003c\/strong\u003e — the included mounting hardware fixes the panel to a sauna wall for a permanent install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand it on the floor\u003c\/strong\u003e — the Sauna Series Floor Stand is a rolling iron base with two upright brackets that hold the panel upright. No tools, no drilling, and locking caster wheels so you can roll it into position, lock it in place, and move it aside afterward (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the panel securely inside your sauna using the included hanging kit, or set it on the Sauna Series Floor Stand for a free-standing setup with no drilling (sold separately).\u003c\/li\u003e\n\u003cli\u003ePlug into a properly rated outlet outside the sauna or into a sauna-rated electrical run.\u003c\/li\u003e\n\u003cli\u003ePower on, set the timer (1–20 minutes), select wavelengths, adjust brightness, and optionally engage pulse mode.\u003c\/li\u003e\n\u003cli\u003eRun your sauna session as normal. The panel operates safely up to 194°F.\u003c\/li\u003e\n\u003cli\u003eLet the panel cool with the sauna before powering off the supply.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hooga","offers":[{"title":"Default Title","offer_id":67685292638481,"sku":null,"price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/5883\/2426\/files\/hooga-ember-red-light-therapy-panel-for-sauna.jpg?v=1791559813","url":"https:\/\/www.360fitnesssuperstore.com\/products\/hooga-ember-red-light-therapy-panel-for-sauna","provider":"360 Fitness Superstore","version":"1.0","type":"link"}