There are 3 buttons on the console; RECOVERY, RESET and the large rotating GO/ENTER button. These buttons can perform various functions depending on the menu or status of the machine.

GO/ENTER: The Go/Enter button rotates clockwise and anti-clockwise to scroll through program settings, increase or decrease values and can be pressed to confirm selections or values inputted into the console.

During program setup if the user begins pedaling the workout will skip any unanswered program setup questions and begin the workout on the screen at that time.

RECOVERY: Press this button to commence a Heart Rate Recovery Test.

RESET: Press and hold the reset button for 2 seconds to clear all data and reset the console.

PARAMETERS DISPLAYED

CALORIES: Indicates an estimation of your total caloric expenditure from the start of the workout or the amount of calories left if a calorie goal was preset. Ranges from 0 to 9999.

DISTANCE: Displays the total distance completed in meters since the start of the workout or the amount of distance left if a distance goal was preset. Ranges from 0 to 99,500 m (99.5 km).

PULSE: Displays your current heart rate in beats per minute via the contact heart rate sensors.

REVOLUTIONS PER MINUTE (RPM): Displays the pedal rotation rate per 60 seconds. For cadence (steps per minute) simply double the RPM value.

SPEED: Displays an estimation of the speed based on the RPM’s.

TIME: Indicates the amount of time accumulated from the start of a program or the amount of time left if a time goal was preset. The time will range from 0 to a maximum of 99 minutes.

G1 (Manual)

The G1 program allows users to set one or multiple workout goals from Time, Distance, Calories or Pulse prior to commencing the workout. A Time, Distance or Calories parameter that has been preset will count down to zero and beep for 8 seconds once achieved (press any button to stop the beeper) then the parameter will begin counting upwards if the user continues exercising. A preset Pulse parameter between 30 and 199 can be set and will beep once achieved and keep beeping if the detected heart rate stays above the preset value.

There are 3 buttons on the console; RECOVERY, RESET and the large rotating GO/ENTER button. These buttons can perform various functions depending on the menu or status of the machine.

GO/ENTER: The Go/Enter button rotates clockwise and anti-clockwise to scroll through program settings, increase or decrease values and can be pressed to confirm selections or values inputted into the console.

During program setup if the user begins pedaling the workout will skip any unanswered program setup questions and begin the workout on the screen at that time.

RECOVERY: Press this button to commence a Heart Rate Recovery Test.

RESET: Press and hold the reset button for 2 seconds to clear all data and reset the console.

PARAMETERS DISPLAYED

CALORIES: Indicates an estimation of your total caloric expenditure from the start of the workout or the amount of calories left if a calorie goal was preset. Ranges from 0 to 9999.

DISTANCE: Displays the total distance completed in meters since the start of the workout or the amount of distance left if a distance goal was preset. Ranges from 0 to 99,500 m (99.5 km).

PULSE: Displays your current heart rate in beats per minute via the contact heart rate sensors.

REVOLUTIONS PER MINUTE (RPM): Displays the pedal rotation rate per 60 seconds. For cadence (steps per minute) simply double the RPM value.

SPEED: Displays an estimation of the speed based on the RPM’s.

TIME: Indicates the amount of time accumulated from the start of a program or the amount of time left if a time goal was preset. The time will range from 0 to a maximum of 99 minutes.

G1 (Manual)

The G1 program allows users to set one or multiple workout goals from Time, Distance, Calories or Pulse prior to commencing the workout. A Time, Distance or Calories parameter that has been preset will count down to zero and beep for 8 seconds once achieved (press any button to stop the beeper) then the parameter will begin counting upwards if the user continues exercising. A preset Pulse parameter between 30 and 199 can be set and will beep once achieved and keep beeping if the detected heart rate stays above the preset value.